Changes

====Corner MTs====

====Corner MTs====

In general, you should MT around every corner.  Corner MTs should be fast and tight.

In general, you should MT around every corner.  Always charge up the MT as fast as possible, and take the corner tightly.

* Sharp corners (>100°): After releasing the MT, hop repeatedly around the rest of the turn. If you started the MT a little too early, then after charging up the MT, hold the control stick towards the corner while holding the slide, until you reach the point where you can begin hopping.

* Non-sharp corners (~60°): Release the MT as soon as possible, straighten out if needed, and untilt.

* Moderately sharp corners (~90°): Release the MT a little before facing the right way, and then continue turning a little before untilting.

* Sharper corners: After charging up the MT, hold the control stick towards the corner for a split second while holding the slide.  Release the MT as soon as possible as you go around the corner.

* Less sharp corners (~60°): Untilt as soon as possible after releasing the MT.

** ~90° corners: Continue turning until you are moving in the right direction, and untilt.

** >100° corners: Hop repeatedly around the rest of the turn.

** Don't aim directly at sharper corners as you approach them.  Instead, aim slightly outside the corner, so that you can turn a little during the slide before reaching the corner.

====MT Tightness====

====MT Tightness====